FOCUS TD

Targeted loosening, targeted fertilisation, targeted sowing

The Focus 6.50 TD 3-point meets the demand for loosening in the traditional row crops with a spacing of 50 cm, e. g.

  • Rape
  • Sunflowers
  • Sugarbeets
  • Soy beans
  • Maize

The TerraGrip 3L tines are arranged on two bars and pre-loosen the row in spacing of 50 cm. The fertiliser is planed in different horizons (deep = working depth, shallow = close to the surface and combination of both).

The newly developed tyre packer 320 / 70 – 24 AS runs exactly between the rows and supports the weigth of the machine with a large contact area.

Strengths

Of the focus td

  • TerraGrip tines pre-loosen the soil in a targeted way and remove harvest residues from the seed and root area
  • A fertiliser deposit is placed (if required in different depths)
  • Moist soil is transported to the germination horizon
  • Angled discs work between the seed rows and create ridges or level the soil according to the requirements
  • The tyre packer consolidates the soil in front of the seed coulters
  • Sowing is carried out by the strong and precise TurboDisc seed coulters into moist soil that is free of harvest residues
  • Row spacings of 30 cm for rape seed and row crops and of 15 cm for crop sowing are possible
  • The optional 3-point linkage of the Focus 6 TD allows for a quicker and easier changing from the TurboDisc seed bar to a Maestro RV seed unit. Thus, a deep placement of fertiliser is now also possible for maize and other single grain seeds with row spacings of 45 – 75 cm.
  • Enormous efficiency due to optional MiniDrill G & F for sowing rape

ALWAYS A TRUMP CARD IN YOUR HAND

  • The Focus 3 TD is the ideal solution for medium-sized farms and the corresponding tractors. The machine excels due to its efficiency and the individual equipment options. Deep loosening of the soil with a targeted placement of fertiliser and exact sowing is combined in only one pass. For tractors as of 250 hp. The well-known equipment options of the Focus line allow for an optimum adaption to the farm-specific conditions.

     

    • Well-known Focus principle with 3 m working width as of 250 hp
    • 3 500 litres double hopper with 60 : 40 partition
    • Well-known equipment options of the Focus TD line
    • Selectable loosening tines
    • Individual levelling discs or crumbling tools
    • 15 or 30 cm row spacing
    • Optional MiniDrill for G & F or PPF
TECHNICAL SPECIFICATIONS
HORSCH Focus TD 3 TD 4 TD 6 TD
Working width (m) 3.00 4.00 6.00
Transport width (m) 3.00 2.98 2.98
Transport height (m) 3.35 3.35 3.70
Length (m) 9.00 9.84 10.40
Axle load (kg)* 4 200 – 5 000 6 500 – 7 400 8 400 – 10 300
Vertical load (kg)* 1 000 – 1 400 1 600 – 2 000 1 900 – 2 500
Weight from (kg)** 5 800 8 240 10 000
Hopper capacity double hopper (l) 3 500 (2 100 : 1 400 l / 60 : 40) 5 000 (2 000 l : 3 000 l / 40 : 60) 5 000 (2 000 l : 3 000 l / 40 : 60)
Dimension of feed openings (m) 0.60 x 0.90 front 0.66 x 1.22 / rear 0.66 x 1.68 front 0.66 x 1.22 / rear 0.66 x 1.68
Filling height double hopper (m) 2.95 2.95 2.95
Tyre size lateral support wheels 15.0 / 55 – 17 15.0 / 55 – 17
Tyre packer size 210 / 95 – 24 AS 210 / 95 – 24 AS 210 / 95 – 24 AS
Tyre packer Ø (cm) 100 100 100
Number of tines 10 14 20
Tine spacing in one row (cm) 60.0 57.2 60.0
Tine spacing (cm) 30.0 28.6 30.0
Frame height (cm) 75 75 75
Release force (kg) / trip height (cm) 630 / 26 630 / 26 630 / 26
Number of seed coulters 10 / 20 14 / 28 20 / 40
Row spacing (cm) 30.0 / 15.0 28.6 / 14.3 30.0 / 15.0
Coulter pressure seed coulters (kg) 5 – 120 5 – 120 5 – 120
Seed coulters / press wheels (cm) 34 34 34
Working speed (km/h) 6 – 10 6 – 10 6 – 10
Power demand (kW/hp) 150 – 220 / 200 – 300 150 – 220 / 200 – 300 220 – 295 / 300 – 400
DA control devices 2 2 2
Depressurized return flow (max. 5 bar) 1 1 1
Oil quantity hydr. fan (l/min) 35 – 45 35 – 45 35 – 45
Lower link linkage Cat. III – III / IV – IV Cat. III – III / IV – IV Cat. III – III / IV – IV
Adj. drawbar linkage Ring hitch Ø 58 – 79 mm Ring hitch Ø 58 – 79 mm
Ball-type linkage K 80 K 80

 

* Weight of the machines with minimum / maximum equipment
** Weights of the machines with Focus tine section and rape seed bar

 

HORSCH Focus TD 3-point Focus 6 TD 3-point Focus 6.35 TD 3-point Focus 6.50 TD 3-point Focus 6.75 TD 3-point
Working width (m) 6.00 6.00 6.00
Working width with TurboDisc seed bar (m) 5.63
Working width with Maestro RV (m) 6.00
Transport width (m) 2.98 2.98 3.47 3.30
Transport height (m) 3.70 3.70 3.70 3.45
Length incl. coulter attachment (m) 10.60 10.60 11.08 10.60
Weight incl. coulter attachment (kg)* 9 500 9 500 9 500 9 500
Weight without coulter attachment (kg)** 8 400 8 400 8 400 8 500
Hopper capacity double hopper (l) 5 000 (2 000 : 3 000 l / 40 : 60)
Dimension of feed openings (m) front 0.66 x 1.22 / rear 0.66 x 1.68
Filling height double hopper (m) 2.95 2.95 2.95 2.95
Tyre size lateral support wheels 15.0 / 55 – 17 15.0 / 55 – 17 15.0 / 55 – 17 15.0 / 55 – 17
Tyre packer size 210 / 95 – 24 AS 210 / 95 – 24 AS 320 / 70 – 24 AS 210 / 95 – 24 AS
Tyre packer Ø (cm) 100 100 100 100
Number of tines 20 17 12 15
Tine spacing in one row (cm) 60.00 70.60 100.00
Tine spacing (cm) 30.00 35.30 50.00 37.50
Number of tines reduced 8
Tine spacing tines reduced (cm) 75
Cutting discs number / Ø (cm) 8 / 50
Frame height (cm) 75 75 75 85
Release force (kg) / trip height (cm) 630 / 26 630 / 26 630 / 26 550 / 29
Number of seed coulters 20 / 40 17 / 34 12 / 24 15 / 30
Row spacing (cm) 30.00 / 15.00 35.30 / 17.60 50.00 / 25.00 37.50 / 18.75
Coulter pressure seed coulters (kg) 5 – 120 5 – 120 5 – 120 5 – 120
Seed coulters / press wheels Ø (cm) 34 / 32 34 / 32 34 / 32 34 / 32
Working speed (km/h) 6 – 10 6 – 10 6 – 10 6 – 10
Power demand (kW/hp) 220 – 295 / 300 – 400 220 – 295 / 300 – 400 220 – 295 / 300 – 400 165 – 270 / 225 – 370
DA control devices 2 (resp. +1 for Maestro preparation kit, hydr. depth adjustment disc harrow section) 2 (+1 resp. for Maestro preparation kit)
Depressurized return flow (max. 5 bar) 1 1 1 1
Oil quantity hydr. fan (l/min) 35 – 45 35 – 45 35 – 45 35 – 45
Lower link linkage Cat. III – III / IV – IV Cat. III – III / IV – IV Cat. III – III / IV – IV Cat. III – III / IV – IV
Adj. drawbar linkage Ring hitch Ø 58 – 79 mm Ring hitch Ø 58 – 79 mm Ring hitch Ø 58 – 79 mm Ring hitch Ø 58 – 79 mm
Ball-type linkage K 80 K 80 K 80 K 80
3-point linkage coulter attachment Cat. III / III Cat. III / III Cat. III / III Cat. III / III

 

* Weight with minimum equipment with tine section 2-row and coulter attachment without coulter extension
** Weight with minimum equipment with 2-row tine section WITHOUT coulter attachment

FEATURES

TurboEdge coulter

SOWING INTO THE OPEN FURROW

What are the excelling features of the TurboEdge coulter?

Ideal for sowing rape and beans with row spacings of 28.6 – 30, 35 and 50 cm at all Focus models.

Assets of the TurboEdge coulter

 

  • Intensive clearing of the harvest residues in the seed furrow
  • Optional embedding of the seed grain with a guaranteed soil contact
  • Perfect depth control by integrated press wheel at seed body
  • Optimum complement for sowing with the Focus when the preparation intensity was low

 

MiniDrill

HIGH EFFICIENCY DUE TO THREE COMPONENTS

For rape sowing there are further equipment options that are specifically adapted to the Focus like a HORSCH MiniDrill . It can be used as a third hopper and thus almost doubles efficiency or saves one pass for pest management.
There are two different options for the MiniDrill equipment. The version MiniDrill G & F is used as a third hopper for seed. Thus, you can almost double the efficiency of the machine when sowing rape. The MiniDrill has a hopper capacity of 400 litres. If the MiniDrill hopper is filled with rape seed, the two large hoppers (capacity 2 000 and 3 000 litres) can be filled with mineral fertiliser. Thus, you can quite easily reduce downtime for refilling and gain valuable time for sowing.
The MiniDrill PPF is the second version. In this case, the MiniDrill is used to take micro-granular compound, underseeds or slug pellets along. This optional third component is applied via outlets to the surface of the field. This MiniDrill version is equipped with its own fan, and its own pneumatic system with separate distributor tower and a outlet in front of every seed coulter.
The option of placing three different components precisely in three different seed horizons makes the Focus the perfect catch crop seed drill. Via the tine section you can for example place field beans deeply, the seed coulters can drill vetches on the normal seed horizon and via the outlet you can apply grass or clover.
The placement of catch crops into the optimum seed horizon, the application of micro-granular compound or slug pellets as well as the option to drill underseeds point out the manifold possibilities to use the MiniDrill PPF at the Focus TD.

 

Menu

9

Home

9

About

9

Products

9

Services

9

Claims

9

Contact us

Get in touch

Charl

+27(0) 79 997 8938

Rigardt

+27(0) 83 276 5846

Quick Contact

Maestro SV

New single grain seed drills for large farms

Maestro CV

Unique seed wagon system with new options

Maestro RV

Versatile, Robust, Precise