Efficient tillage technology with a large range of use

The Terrano FX is a compact universal cultivator which can be equipped with different points. It is used for a shallow whole area stubble cultivation or for intensive loosening and mixing of straw to a working depth of between 5 and 30 cm. Its 3-bar, robust frame design with high clearance ensures uniform mixing in of residues even in difficult soil conditions. In comparison to 2-bar cultivators, the Terrano FX keeps the soil within the cultivator for a longer time, thus ensuring an excellent mixing performance. Even levelling and deep consolidation ensure a perfect finish and produce an optimal seedbed.
Already in 2003, the DLG Fokus test confirmed the low horsepower requirement of the Terrano FX. Maintaining best working quality, the Terrano FX consumes 20 % less diesel compared to the average consumption of all tested candidates.
The point systems can be changed easily. Each is individually optimised for its specific task (whole area / shallow, intensive mixing / deep). This makes the Terrano FX versatile, not only in working depth but also in performance. The working depth of the Terrano FX is controlled by the hydraulics of the tractor and the packing system. The depth is set with ClipOn spacers (AluClips) that limit the lowering depth of the cultivator frame in relation to the packing system.
The robust TerraGrip tine provides constant point control at the required working depth. The MulchMix points guarantee intensive mixing of the soil without damaging the soil structure. The levelling discs are optimally placed and can be adjusted so that the surface is level. In addition to its weight, the Terrano uses the down force of the tines for an even and deep consolidation.


Of the terrano fx

  • All-purpose
  • Works in crop residues superbly, under all conditions
  • Really easy to pull, tractive power requirement starts at 120 hp
  • Robust, even for the most stringent requirements
  • Working depths between 5 and 30 cm
  • Short, compact design
  • Equipment versions to suit all conditions



The HORSCH Terrano FX is a compact 3-bar cultivator with a wide range of use – whether for shallow stubble cultivation or intensive soil cultivation.
The all-rounder Terrano FX mixes perfectly in all depths between 5 and 30 cm. Thanks to the frame height of 85 cm (on the 3, 3.5, 4 and 5 FX models) and a tine spacing of 30 cm, the Terrano accurately mixes in all crop residues, even under the heaviest of conditions.

The Terrano fx


  • All-purpose
  • Works in crop residues superbly, under all conditions
  • Really easy to pull, tractive power requirement starts at 120 hp
  • Robust, even for the most stringent requirements
  • Working depths between 5 and 30 cm
  • Short, compact design
  • Equipment versions to suit all conditions
Working width (m)
Transport width (m)
3.00 3.50 4.06 3.00 3.00 3.00 3.00
Transport height (m)
2.05 2.05 2.05 3.00 3.10 3.60 3.60
Length (m)
3.80 3.80 3.80 4.00 7.10 4.00 7.10
Weight with shear bolt protection (kg)*
1 390 1 810 2 250 2 200 3 150 3 000 3 900
Weight with TerraGrip tines (kg)*
1 860 2 190 2 600 2 740 3 690 3 700 4 600
Tyre size support wheels
10.0 / 75 – 15.3 10.0 / 75 – 15.3
Tyre size chassis
400 / 60 – 15.5 400 / 60 – 15.5
Number of tines
10 12 14 13 13 16 16
Tine spacing (cm) in one row
90.00 89.00 88.20 91.50 91.50 93.00 93.00
Tine spacing (cm)
30.00 29.00 29.40 30.50 30.50 31.00 31.00
Frame height (mm)
850 850 850 850 850 850 850
Double-acting control devices
1 2 1 2
Power demand (kW/hp)
90 – 147 / 120 – 200 100 – 163 / 140 – 220 115 – 180 / 160 – 250 115 – 180 / 160 – 250 115 – 180 / 160 – 250 150 – 220 / 205 – 300 150 – 220 / 205 – 300
3-point linkage
3-point Cat. II / III 3-point Cat. II / III 3-point Cat. II / III 3-point Cat. II / III 3-point Cat. II / III – III / IV
Connection via lower link
Cat. III – III / IV – IV Cat. III – III / IV – 



The TerraGrip is a very powerful tine with overload protection. The trip height amounts to 30 cm without triggering a shear bolt. This saves time and money. Due to the effective stone protection the tine moves quickly in case of overload and due to the spring force penetrates the soil again quickly and exactly – without the usual side movements.
When avoiding an obstacle, the force of the spring decreases from 500 kg to 175 kg. The force that acts on the frame is thus reduced considerably. The optimised spring kit allows for an exact point control in the desired working depth – even in heavy soils and large working depths. Due to high-quality material and large pivot points any greasing points become unnecessary.




The MulchMix point with its steep angle is designed for the intensive mixing of harvest residues and deep cultivation. Due to the large diameter (600 mm) of the HORSCH MulchMix point the soil is not pressed and its structure remains intact. Regardless of the working depth: The point never penetrates the soil vertically. This reduces the horse power requirement and saves valuable petrol. Even if there are high amounts of straw, it achieves an excellent mixing quality. The MulchMix points consist of three parts (point, guide plate, wing) which can be changed independently. For a very shallow stubble cultivation and all-over cutting the wings can be set to a shallow position. If deep loosening and at the same time an excellent mixing of the soil is desired, the wings can simply be dismantled.
The newly developed HORSCH TerraCut wing is used for shallow, all-over tillage at a maximum depth of 8 cm. The 40 cm wide wing is combined with the well-known LD or LD+ point and can be used on all HORSCH TerraGrip tines shafts. The shallow setting angle of the TerraCut point guarantees a safe cutting effect and a low mixing effect for an efficient drying of growth or catch crops.
If a deep loosening is sufficient and mixing is not required, HORSCH LD points can be mounted that loosen excellently subterraneously up to 15 cm and do not move much earth. Another option is the HORSCH ULD point which due to its shape does not take clods to the surface, but only loosens deeply.

    Terrano 4 FX

    Terrano 3 FX with shear bolt protection

    Fertiliser guide plate

    Fertiliser mounting

    One-row, spring-loaded disc levelling

    Rigid levelling discs

    MulchMix point

    MulchMix point

    MulchMix point HM+

    TerraCut Schar

    LD+ point

    LD point

    MulchMix coulter wing HM

    Cultivation wing for all-over cutting, two working depth can be adjusted

    ULD+ point as wear part for all cultivators

    Optional: harrow behind the packer

    Adjustment of working depth

    RollPack packer

    RollPack packer

    MiniDrill seed distributors put the seed directly into the wet soil.













    Contact us

    Get in touch


    +27(0) 79 997 8938


    +27(0) 83 276 5846

    Quick Contact

    Maestro SV

    New single grain seed drills for large farms

    Maestro CV

    Unique seed wagon system with new options

    Maestro RV

    Versatile, Robust, Precise